|
|
| Taper Seal-10 & 15,000 psi |
|
 |
|
|
| The Taper Seal is a compression type tube connection that is extremely easy to use and re-make. The sleeve clamps onto tubing much like a machine collet for a safe and reliable connection. Taper Seal valves are available in 1/16", 1/8", 1/4", and 3/8" O.D. tubing sizes and five patterns to satisfy widely varied requirements. A line of fittings is available to facilitate adapting to Medium Pressure or High Pressure systems. |
 |
|
|
|
|
|
|
| Medium Pressure-20,000 psi |
|
|
|
|
| The Taper Seal is a compression type tube connection that is extremely easy to use and re-make. The sleeve clamps onto tubing much like a machine collet for a safe and reliable connection. Taper Seal valves are available in 1/16", 1/8", 1/4", and 3/8" O.D. tubing sizes and five patterns to satisfy widely varied requirements. A line of fittings is available to facilitate adapting to Medium Pressure or High Pressure systems. |
 |
|
|
|
|
|
|
|
| High Pressure-30K, 40K & 60,000 psi |
|
|
|
|
| The Taper Seal is a compression type tube connection that is extremely easy to use and re-make. The sleeve clamps onto tubing much like a machine collet for a safe and reliable connection. Taper Seal valves are available in 1/16", 1/8", 1/4", and 3/8" O.D. tubing sizes and five patterns to satisfy widely varied requirements. A line of fittings is available to facilitate adapting to Medium Pressure or High Pressure systems. |
 |
|
|
|
|
|
|
|
| Ultra High Pressure-100K & 150,000 psi |
|
|
|
|
| Ultra High Pressure components use a coned-and-threaded connection which accommodates the extreme conditions found in these applications. Ultra High Pressure valves are available in 1/4" and 3/8" O.D. tubing sizes and four patterns to satisfy widely varied requirements. A line of fittings is available to facilitate adapting to High Pressure systems. |
 |
|
|
|
|
|
|
|
| Specialty Valves |
|
|
|
|
| High Pressure Equipment Company produces many valves engineered for specific requirements and operating conditions. |
 |
|
|
|
Ball Valves provide shut-off of liquid or gas flow through 20,000 psi. These valves are available in two way and three way configurations for standard and severe duty.
Hastelloy Valves are the most common special material valves we produce. We maintain an inventory of Hastelloy C-276 to assure prompt delivery.
High Temperature Valves feature an extension to remove the packing area (stuffing box) from the hot zone of a valve, making them suitable for use at 1,000°F (538°C).
Micro Control Metering Valves are designed to assure the fine and precise stem travel necessary for excellent control of flow. An integral vernier indicator provides exact measurement of stem revolution.
Relief Valves protect a system from over-pressure damage and failure. Relief Valves are offered in pressure ranges: 3,000 psi to 30,000 psi.
Pipe Connection Valves allow you to plumb a system through 15,000 psi using standard NPT pipe connections.
Male Bottom Connection Valves are designed for applications where extra rigidity or space restrictions are critical. These valves feature one-piece stem construction to increase durability and reduce overall height.
|
|
|
|
|
|
| Air Operated Valves |
|
|
|
|
| High Pressure Equipment Company offers five lines of air operators to accommodate remote operation of pressure valves up to 100,000 psi. Various models of diaphragm and piston operated valves are available in both normally open and normally closed models, and can be controlled by air regulator, electrical solenoid or low pressure manual valve. The Remetco line of air operated metering valves provides remote operation for fine metering applications. |
 |
|
|
|
|
|
|
|
| Accessories |
|
|
|
|
| High Pressure Equipment Company offers an extensive selection of accessory components to enable you to completely plumb a fluid system. These accessories allow you to move from tube to tube, tube to pipe, facilitate system pressure changes and monitor the temperatures and pressures within your system. |
 |
|
|
Adapters are available in both female to male and male to male configurations. Adapter models exist for all HiP connections and in the various pressure ranges to complement our valve and fitting lines.
Couplings enable you to make a wide variety of female to female connections. As with our adapters, couplings accommodate our complete line of valves and fittings. In addition, reducer couplings allow you to reduce line size within a given pressure range.
Thermocouple adapters are an excellent method to provide for temperature measurement in pressure systems up to 15,000 psi.
Pressure gauges are available in seven models to monitor system pressures ranging from atmosphere to 100,000 psi.
|
|
|
|
|
|
|
| Tooling |
|
|
|
|
| To ensure safe and leak-free operation of your pressure system, High Pressure Equipment Company provides complete installation instructions for the make-up of a coned and threaded connection. In addition to outling the correct procedures, we offer coning and threading tools and female tubing connection tools. |
 |
|
|
|
|
|
|
| Back to Top |
|
