|
| |
|
| Mechanical Valves & Piping's |
 |
|
|
|
|
|
|
|
|
|
| Bonney Forge valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration strength welded joint is available. |
| |
| Gate Valve Design Construction and Specifications |
| |
| Construction is as follows: |
| |
 |
Full Port or Conventional Port |
|
Outside Screw and Yoke (OS & Y) |
|
Two piece self aligning packing gland |
|
Integral backseat |
|
Socket weld Ends to ASME B16.11 |
|
Screwed Ends (NPT) to ANSI/ASME B1.20.1 |
|
|
 |
 |
| Bolted Bonnet |
Welded Bonnet |
|
|
| |
|
|
|
|
|
| |
|
|
|
| Bonney Forge valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration welded joint is available. |
| |
| Globe Valve Design Construction and Specifications |
| |
Bonney Forge globe valves conform to MSS-SP-118, ASME B 16.34, and BS 5352. Each is tested according to API 598, and marking is per MSS-SP 25.
Bonney Forge Y type globe valves conform to ANSI B16.34. Each are tested according to API 598, and marking MSS-SP 25. |
| |
| Construction is as follows: |
| |
|
Full Port or Conventional Port |
|
Outside Screw and Yoke (OS & Y) |
|
Two piece self-aligning packing gland |
|
Bolted bonnet with spiral-wound gasket or threaded and seal welded bonnet |
|
Integral backseat |
|
Loose solid disc |
|
Socket weld ends to ASME B16.11 |
|
Screwed Ends (NPT) to ANSI/ASME B1.20.1 |
|
|
 |
 |
| Bolted Bonnet |
Welded Bonnet |
|
|
| |
|
|
|
|
|
| |
|
|
|
Bonney Forge valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration strength welded joint is available.
The check valves are also available in three different design configurations. These are piston check, ball check, or swing check designs. |
| |
| Globe Valve Design Construction and Specifications |
| |
| Bonney Forge check valves conform to MS-SP-118 and ASME B16.34. Each are tested according to API 598, and marking is per MSS SP25. |
| |
| Construction is as follows: |
| |
|
Full Port or Conventional Port |
|
Piston check |
|
Ball check |
|
Swing check |
|
Spring available on request |
|
Bolted cover with spiral-wound gasket or threaded and seal welded cover |
|
Socket weld Ends to ASME B16.11 |
|
Screwed Ends (NPT) to ANSI/ASME B1.20.1 |
|
|
 |
 |
| Bolted Bonnet |
Welded Bonnet |
|
|
| |
|
|
|
|
|
| |
|
|
|
| Bonney Forge valves are available in welded bonnet design with a threaded and seal welded joint. On request a full penetration strength weld joint is available. The Y-Pattern valves are available in globe and check design configurations. |
| |
| Y-Pattern Design Construction and Specifications |
| |
| Bonney Forge Y-Pattern globe and check valves conform to ANSI B16.34. Each are tested to API-598 and marking is per MSS SP-25. |
| |
| Construction is as follows : |
| |
|
Full Port |
|
Piston and ball check |
|
Two piece self-aligning packing gland |
|
Integral back seat |
|
Socket weld Ends to ASME B16.11 |
|
Screwed Ends (NPT) to ANSI/ASME B1.20.1 |
|
Outside Screw and Yoke (OS & Y) |
|
Spring available on request |
|
Loose solid disc |
|
|
 |
| Bolted Bonnet |
|
|
| |
|
|
|
|
|
| |
|
|
|
Bonney Forge valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration welded joint is available.
The cryogenic valves are available in gate and globe design configurations. Valves are designed with an extended body for use in cold services to -196 degrees C (-320 degrees F). |
| |
| Cryogenic Valve Design Construction and Specifications |
| |
| Bonney Forge cryogenic gate and globe valves conform to API 602, MSS-SP-118, and BS 6364. Each are tested according to API 598 and marking is per MSS-SP-25. |
| |
| Construction is as follows : |
| |
|
Full port or conventional port |
|
Two piece self-aligning packing gland |
|
Bolted bonnet with spiral-wound gasket or threaded and seal welded bonnet |
|
Integral backseat |
|
Pressure relief hole on seat (for Gate Valves only) |
|
Socket welded Ends to ASME B16.11 |
|
Screwed Ends (NPT) to ANSI/ASME B1.20.1 |
|
Special extension lengths on request |
|
PTFG stem packing on request |
|
Special low temperature testing on request |
|
Outside Screw and Yoke (OS & Y) |
|
|
 |
| Bolted Bonnet |
|
|
| |
|
|
|
|
|
| |
|
|
|
| Bonney Forge valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration welded joint is available. Integral flanged end valves are available in gate, globe, piston check, ball check, and swing check design configurations. |
| |
| Integral Flanged End Valve Design Construction and Specifications |
| |
| Bonney Forge integral flanged end valves conform to API 602, MSS-SP-118 (as applicable), and ANSI B16.34. Each are tested according to API 598, and marking is per MSS-SP-25. |
| |
| Construction is as follows : |
| |
|
Full Port and Conventional Port |
|
Face to face according to ANSI B16.10 |
|
Flanges according to ANSI B16.5 |
|
Outside Screw and Yoke (OS & Y) |
|
Two piece self-aligning packing gland |
|
Bolted bonnet with spiral-wound gasket retained type |
|
Integral backseat |
|
Integral body flanges |
|
RTJ body bonnet gasket ring joint type |
|
|
 |
| Bolted Bonnet Integral Flanged End Valve |
|
|
| |
|
|
|
|
|
| |
|
|
|
| Bonney Forge valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration strength welded joint is available. Bellows sealed valves are available in all gate or globe design configurations. |
| |
| Bellows Sealed Valve Design Construction and Specifications |
| |
| Bonney Forge bellows sealed valves conform to API 602, MSS-SP-118 (as applicable), BS 5352 and ANSI B16.34. Each are tested according to API 598, and marking is per MSS-SP-25. |
| |
| Construction is as follows : |
| |
|
Outside Screw and Yoke (OS & Y) |
|
Two piece self aligning packing gland |
|
Bolted bonnet spiral-wound gasket with threaded and seal welded bonnet |
|
Integral backseat |
|
Grease nipple for stem |
|
Socket weld ends to ASME B16.11 |
|
Screwed Ends (NPT) to ANSI/ASME B1.20.1 |
|
|
 |
| Bolted Bonnet Integral Flanged End Valve |
|
|
| |
|
|
|
|
|
| |
|
|
|
| Bonney Forge extended body gate valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration strength welded joint is available. |
| |
| Extended Body Valve Design Construction and Specifications |
| |
| Bonney Forge extended body gate valves conform to API 602. Each are tested according to API 598 and marking is per MSS-SP-25. |
| |
| Construction is as follows : |
| |
|
Integral extended end body with threaded, socket weld or butt weld end connection |
|
Outside Screw and Yoke (OS & Y) |
|
Two piece self aligning packing gland |
|
Bolted bonnet with spiral-wound gasket or threaded and seal welded bonnet |
|
Integral backseat |
|
Socket weld ends to ASME B16.11 |
|
Screwed Ends (NPT) to ANSI/ASME B1.20.1 |
|
|
 |
| Welded Bonnet Extended Body Valve |
|
|
| |
|
|
|
|
|
|
| |
|
|
| |
|
|
|
